Throttle Pedal Reset

Throttle Pedal reset: Erratic or fast tickover:

Could be because the throttle butterfly is stuck - or is not matched to the accelerator pedal potentiometer:

  1. Switch ignition switch off then on for 15 sec or until a "wheezing" type noise stops.
  2. Switch off for 15 sec
  3. Depress accelerator fully; switch on ignition for 15 sec then off again.  Do NOT start the engine.

The pedal and the throttle should now be matched.

All content is created by Jim Butterworth (thanks a million, you are a star).
This is an archived copy, rehosted with his permission. Original site: jimbutterworth.co.uk